Factors and schedules
GCF and LCM of 18 and 24: Grouping vs Repeating Schedules
The GCF of 18 and 24 is 6; the LCM is 72. Compare equal groups and shared repeat times, with factor lists and verification.
Number JD Editorial Team · Published 2026-10-13
Two answers to two different questions
The greatest common factor (GCF) of 18 and 24 is 6. It is the largest positive integer dividing both without a remainder. The least common multiple (LCM) is 72, the smallest positive value divisible by both.
Use 6 when cutting two lengths into the largest equal pieces or forming identical groups with nothing left over. Use 72 when looking for a common repeating interval. Factors divide the starting numbers; multiples are produced by multiplying them.
Find the GCF from complete factor lists
Factors of 18: 1, 2, 3, 6, 9, 18.
Factors of 24: 1, 2, 3, 4, 6, 8, 12, 24.
The common factors are 1, 2, 3, 6. The largest is 6. Checking 18 ÷ 6 = 3 and 24 ÷ 6 = 4 confirms that neither division leaves a remainder.
Find the LCM and verify it
For positive integers, GCF × LCM = the product of the two numbers. Therefore LCM = (18 × 24) ÷ 6 = 72. Divide by the GCF before multiplying if you want smaller intermediate values.
Check: 72 ÷ 18 = 4, and 72 ÷ 24 = 3. These are whole numbers. The product check is 6 × 72 = 432. Simply multiplying the inputs gives a common multiple, but here it is not the least one because they share a factor greater than 1.
Apply each result to a different situation
Two ribbons measure 18 cm and 24 cm. The longest equal pieces that use both ribbons completely are 6 cm each. That produces 3 pieces from the first ribbon and 4 from the second, or 7 pieces in all.
Two practice reminders begin together and recur every 18 and 24 minutes. They next coincide after 72 minutes, assuming exact intervals and no interruptions. If they start at different times, you need their starting offsets as well; the LCM alone does not settle that problem.
Try a scaled example
Double both starting numbers to 36 and 48. Their GCF becomes 12, and their LCM becomes 144. The number of ribbon pieces in the grouping example remains the same because all lengths were scaled equally.
Before calculating, name the unit and decide whether you are seeking a divisor or a shared multiple. That choice is usually more important than the arithmetic itself.
Explore the examples
Check the mathematical definitions
For fractions, percentages and worked arithmetic, see OpenStax Prealgebra. For number definitions, see OpenStax on prime and composite numbers and Wolfram MathWorld on digital roots. Worked examples on this page are calculated for this guide.
Continue learning
GCF and LCM of 24 and 36: Grouping vs Repeating Schedules
The GCF of 24 and 36 is 12; the LCM is 72. Compare equal groups and shared repeat times, with factor lists and verification.
GCF and LCM of 16 and 24: Grouping vs Repeating Schedules
The GCF of 16 and 24 is 8; the LCM is 48. Compare equal groups and shared repeat times, with factor lists and verification.
GCF and LCM of 20 and 30: Grouping vs Repeating Schedules
The GCF of 20 and 30 is 10; the LCM is 60. Compare equal groups and shared repeat times, with factor lists and verification.
GCF and LCM of 15 and 25: Grouping vs Repeating Schedules
The GCF of 15 and 25 is 5; the LCM is 75. Compare equal groups and shared repeat times, with factor lists and verification.